Microfiber towels mainly have six characteristics
High water absorption: The ultrafine fiber uses the orange-petal technology to divide the filament into eight lobes, which increases the surface area of the fiber, increases the porosity in the fabric, and enhances the water absorption effect by capillary wicking effect. Rapid water absorption and rapid drying become its remarkable characteristics.
Strong decontamination: The fiber fineness is 1/10 of silk and 1/200 of hair silk. Its special cross section can capture dust particles as small as several microns, and the degreasing effect is very obvious.
No hair removal: high-strength synthetic fiber filaments, not easy to break, at the same time using fine weaving method, no spinning, no stripping, the fiber is not easy to fall off the towel surface. It is used to make cleaning towel and wipe the towel. It is especially suitable for wiping bright paint surface, plating surface, glass, instrument and LCD screen. It can clean the glass in the process of car filming, which can achieve very ideal filming effect.
Long life: Due to its high strength and toughness, microfiber has a service life that is more than four times that of ordinary towels. It does not deform after repeated washing. At the same time, polymer fiber does not produce protein hydrolysis like cotton fiber. That is, it will not be cool after use, nor will it be moldy, rot, and have a long life.
Easy to clean: When using ordinary towels, especially natural fiber towels, the dust, grease, dirt, etc. on the surface of the object will be directly absorbed into the fiber and left in the fiber after use. It is not easy to remove, even after a long time. Will become hard and lose flexibility, affecting the use. The superfine fiber towel absorbs dirt between the fibers (not inside the fiber), and the fiber has high fiber density and high density, so the adsorption capacity is strong, and it is only necessary to clean with water or a little detergent after use.
It does not fade: the dyeing process uses TF-215 dyeing agent for microfiber materials, and its retarding, transferability, high-temperature dispersibility, and decolorization index all meet the strict standards of export international market, especially its non-fading The advantage is that it does not cause any discoloration pollution when cleaning the surface of the article.