The drying time of KISHO ceramic coating is closely related to temperature and humidity. If you have not yet mastered the ceramic coating operation, in order to prevent marks from wiping too late, please perform the wiping process immediately after applying the ceramic coating agent. After understanding the ceramic coating operation, wait for 1 minute to 2 minutes after the ceramic coating is applied, and then perform the wiping step.
Wiping before the film is hardened can prevent the ceramic coating agent from rubbing too much on the towel, which will increase the thickness of the film and improve durability. The following is the reference time given by the technicians: the temperature is 10 degrees, waiting for 8 minutes, the temperature is 20 degrees, waiting for 4 minutes, and the temperature is 30 degrees, waiting for 2 minutes. The above time is for reference only. According to the surface temperature of the paint, the humidity of the day will change the hardening speed. It is recommended to test the wiping time during each construction. You can try it with a towel. The best wiping time is when there is a little resistance. Use ceramic coating on the whole vehicle after the wipe time of the day.
Si-811ceramic coating: The crystal is transparent and has excellent properties such as improving the glossiness, hydrophobicity and antifouling of the paint surface. It has super adhesion and can be maintained for about 3 years. The hardness is about 6H. The water splashing effect is excellent. Paint a real protective film layer.
How to use: After applying a board surface, wait 2-8 minutes and then start wiping, first wipe with a wet towel evenly (no need to wipe repeatedly, just extend the ceramic coating), and then immediately wipe the ceramic coating with a dry towel Layer, rub the surface until it is bright and smooth. Wiping time reference: 30℃=within 3 minutes, 20℃=within 5 minutes, 10℃=8 minutes. The crystal hardening speed of ceramic coating is directly related to temperature and humidity. It is recommended to use first according to the temperature and humidity of the construction site at that time. A small section test determines the wiping time.
Case from UK customer feedback