How To Apply Ceramic Coating

How To Apply Ceramic Coating

KISHO Gloss-Coat is much like the clear coat that already exists on your vehicle, except it forms a shell of protection that is glossier, slicker, and less prone to wash-induced swirl marks and marring. Surfaces that are coated with KISHO Gloss-Coat will be protected for up to 2-5 years.KISHO...
Chat Now

Product Details

KISHO Gloss-Coat is much like the clear coat that already exists on your vehicle, except it forms a shell of protection that is glossier, slicker, and less prone to wash-induced swirl marks and marring. Surfaces that are coated with KISHO Gloss-Coat will be protected for up to 2-5 years.KISHO Gloss-Coat creates a self cleaning finish that is considerably easier to clean and maintain compared to conventional waxes and sealants. 

How to apply ceramic coating?

Si-811 glass coating agent practice method 

1. Drip Si-811 glass coating agent to coating sponge for 7-10 drops, first swear it laterally, then swear it vertically with "#" pattern, recommended at 50cm*50cm for each practice area, and note the usage quantity, since excessive usage per time may lead to non-uniform smearing or wiping obstruction; 

2. Wait 2-8 minutes to wipe after smearing, first use a wet towel to wipe with even strength (no need to wipe repeatedly, just spread the glass coating agent), then immediately use a dry towel to wipe the glass coating layer, until the surface is bright and smooth. Wiping duration recommendation: 30℃=within 3 min, 20℃=within 5 min, 10℃=within 8 min, glass coating hardening rate is directly correlated with temperature and humidity, thus it is recommended to measure local temperature and humidity before determining the wiping duration; 

3. Check wiping omission for each part under completion, until the whole vehicle is covered. 

4. Single practice of glass coating effectiveness is well enough, nevertheless the second practice will increase thickness and durability of coating film, in this case please exercise the second practice after previous one no sooner than 1-2 hours.

Top-24 protectant practice method 

After completion of whole vehicle Si-811 glass coating practice, postpone for above 2 hours to carry out Top-24 protectant practice; 

1. Jiggle before practice, spray Top-24 protectant on the finish, 4 to 5 times for half the hood.; 

2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 

3. It is recommended a practice of Top-24 protectant for every 3-6 months of the vehicle to better protect the glass coating film. 

   

Hot Tags: how to apply ceramic coating, Japan, manufacturers, suppliers, factory, customized, brands, free sample, made in Japan

Inquiry

You Might Also Like