Brake Maintenance Four-piece

- Apr 24, 2019-

Brake maintenance four-piece

1.Brake disc cleaning agent

Product performance: Brake disc cleaning agent is a professional cleaning agent for oil, stain and dust which can quickly clean the brake parts of brake discs, brake hubs and brake pads, so that the brake discs can dissipate heat well, eliminate the brake noise of the car and promote Brake, reduce heavy metal pollution and be more environmentally friendly. The brake disc cleaning agent can quickly clean the brake disc, the oil stain on the brake hub and the brake pad dust, keep the brake disc heat well, eliminate the brake noise of the car and protect the brake disc parts.

Maintenance area: Brake disc Spray the area to be cleaned until the oil and dust are completely cleaned, then wipe with a clean towel, leaving no dust and residual liquid after washing.

Applicable vehicles: It is used for quick cleaning of small metal structural parts of automobiles, and is suitable for cleaning brake components such as brake discs and brake pads.

The necessity of maintenance: quick cleaning of oil stains, stains and dust on the brake disc, brake hub and brake pads, so that the brake disc is well cooled;

Note: For the front of the brake disc, fully shake it before use, and thoroughly clean the surface of the brake disc to keep the brake disc clean.

net. Contain high pressure gas, please store at ambient temperature above 50 degrees Celsius; this product is flammable, please keep away from open flame and fire when construction

Equipment preparation.

2. Sub-pump guide pin lubricant

Product performance: prevent the pump guide pin from rusting, lubricate the movable shaft and piston surface of the pump, and extend the service life of the pump and brake pads

Content: 10G

Maintenance part: the moving shaft of the pump and the surface of the piston;

Maintenance interval: 20,000 kilometers of vehicle journey;

How to use: Clean the guide pin, bring a single finger glove, and apply the product evenly on the guide pin, brake cylinder and piston surface;

Applicable vehicles: especially suitable for ABS brake system;

The necessity of maintenance: extend the service life of the sub-pump and brake pads to ensure safe driving;

Note: Note that it can only be used on the back of the brake pad and in the slot. If the position is improper, it may cause the brake to malfunction. all

Lubrication series products are strictly prohibited to be used on the front side of brake pads and brake discs. Otherwise, the brakes may be malfunctioning. Among the four products, only the brake disc cleaning agent is used for the front of the brake disc.

3. Brake pad high temperature protection agent

Content: 15G

Product performance: Eliminate the squeaking of the brake pads, prevent the brakes from being stuck by heat, and eliminate the noise of the brakes of the brake system;

Easy to disassemble, prevent corrosion of the brake system, prevent water and salt attack, maintain good lubrication durability (for the metal back of the brake pads);

Maintenance parts: brake pads, orders, brake calipers;

Usage: First use the brake cleaner to clean the brake pads, the brakes, brake calipers, etc., and then use a small brush on the back of the brake pads (disable the front),

To evenly apply a thin layer to the film and brake caliper;

Applicable vehicles: especially suitable for ABS brake system;

The necessity of maintenance: eliminate the noise of the brakes of the brake system;

4. High temperature resistant anti-seize lubricant

Content: 10G

Product performance: prevent the root of the hub axle from rust, prevent the hub from being difficult to disassemble, extend the service life of the hub, and have good lubricity and high temperature resistance.

Long lasting;

Maintenance part: the root of the hub shaft;

Maintenance method: first use the brake disc to clean the hub, (the rust is used to remove the rust and then clean the sandpaper) and the root of the central shaft, and then evenly apply the small brush to the contact part of the hub and the steel ring and the root of the central shaft;

Applicable vehicles: especially suitable for ABS brake system;

The necessity of maintenance: prevent the root of the hub shaft from being rusted, prevent the hub from being difficult to disassemble, and prolong the service life of the hub;

Note: It is strictly forbidden to use on the front of brake pads and brake discs, otherwise it may cause brake failure.