Structural features of tapered roller shaft tapered roller bearings
The type of tapered roller bearing is 30,000, and the tapered roller bearing is a separate bearing. Under normal circumstances, especially in the size range of GB/T307.1-94 "Rolling bearing radial bearing tolerance", the tapered roller bearing outer ring and the inner component are 100% interchangeably usable.
The angle of the outer ring and the outer race diameter have been standardized as the outer dimensions. Changes are not allowed at the time of design and manufacture. So that the outer ring of the tapered roller bearing and the inner component can be universally interchanged worldwide.
Tapered roller bearings are mainly used to withstand radial and axial combined loads based on radial loads. Compared with angular contact ball bearings, the bearing capacity is large and the limit speed is low. Tapered roller bearings are capable of withstanding axial loads in one direction and can limit axial displacement in one direction of the shaft or housing.